6 Parameter Measurement Information

6.1 Off-Leakage Current

There are two types of leakage currents associated with a switch during the off state:

1. Source off-leakage current IS(OFF): the leakage current flowing into or out of the source pin when the switch

is off.

2. Drain off-leakage current ID(OFF): the leakage current flowing into or out of the drain pin when the switch is

off.

The setup used to measure both off-leakage currents is shown in Figure 6-1.

S1

GND

VS

D1

VD

A

Is (OFF)

VDD

VSS

IS(OFF)

S1

GND

VS

D1

VD

VDD

VSS

ID(OFF)

ID (OFF)

A

S16

VS

A

Is (OFF)

D16

VD

S16

D16

ID (OFF)

A

VS

VD

RGND

RGND

VS

VD

Figure 6-1. Off-Leakage Measurement Setup

6.2 Device Turn On/Off Time

Turn-off time (tOFF) is defined as the time taken by the Sx pin of the TMUX9616x to rise to a 90% final value after

the CLK signal has risen to 50% of its final value. Turn-on time (tON) is defined as the time taken by the output of

the TMUX9616x to fall to a 10% initial value after the CLK signal has risen) to 50% of its final value. Figure 6-2

shows the setup used to measure tON and tOFF.

VSS

VSS

0.1 µF

GND

Sx

Dx

RL

100V

VDD

VDD

0.1 µF

RGND

CLK

50%

50%

tOFF

tON

10%

90%

Sx

Figure 6-2. Turn-on/off Measurement Setup

TMUX9616, TMUX9616N

SCDS436A – SEPTEMBER 2023 – REVISED DECEMBER 2024

www.ti.com

14

Submit Document Feedback

Copyright © 2024 Texas Instruments Incorporated

Product Folder Links: TMUX9616 TMUX9616N