12

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

5. Pull the starting handle lightly until

you start to feel resistance. Then pull

up and away suddenly to start the

engine.

NOTE: You might need to do this more

than once.

6. Once the engine has warmed up from a cold start, move the choke lever to the

‘OFF’ position.

SETTING THE ENGINE SPEED

After starting the engine, move the throttle lever to the FAST position for self-priming

and check pump output.

Pump output is controlled by adjusting

engine speed.

• Moving the throttle lever in the

FAST direction will increase pump

output.

• Moving the throttle lever in the

SLOW direction will decrease

pump output.

WARNING: WHEN THE PUMP HAS STARTED, RELEASE THE STARTING

HANDLE SLOWLY TO PREVENT INJURY/DAMAGE AS IT RETURNS.