15

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Put a oil collection tray below the

drain plug.

3. Unscrew the drain plug and let the

used engine oil drain from the

crankcase into the oil collection tray.

NOTE: Drain the engine oil when the

engine is warm, this will make

sure that the oil flows out

faster.

4. Replace the drain plug.

5. Fill the crankcase with engine oil.

• Fill until the oil touches the threads in the oil fill tube.

• Oil capacity (0.6 L).

• We recommend that you use CLARKE SAE10W30 oil (Part No: 3050845) in

this pump available from your CLARKE dealer.

6. Replace the oil filler cap/dipstick.

ENVIRONMENTAL PROTECTION

One of the most damaging sources of pollution is oil, DO NOT throw away or pour it

down drains. Put it in a leak proof container and take it to your local waste disposal

site.

CHANGING THE SPARK PLUG

Replace the spark plug after the first month or every 50 hours of use.

1. Remove the spark plug cap from the

spark plug.