9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

11. NEVER point the MIG torch at any person or animal.

12. NEVER touch the MIG torch nozzle until the welder is switched OFF and the

nozzle has been allowed to cool.

13. NEVER connect, disconnect, or attempt to service the welding torch, until the

machine is switched OFF and disconnected from the mains supply.

14. NEVER allow the earth cable or torch hose to become wrapped around the

operator or any person in the vicinity.

A comprehensive range of CLARKE safety equipment for use when welding is available

from your local dealer.

Consideration should be given to shielding the supply cable of permanently installed

welding equipment, in metallic conduit or equivalent. Shielding should be electrically

continuous throughout its length.

The shielding should be connected to the welding power source so that good

electrical contact is maintained between the conduit and the welding power source

enclosure.

The welding equipment should be routinely maintained according to the

manufacturer’s recommendations. All access and service doors and covers should be

closed and properly fastened when the welding equipment is in operation. The

welding equipment should not be modified in any way except for those changes and

adjustments covered in the manufacturer’s instructions. In particular, the spark gaps

of arc striking and stabilizing devices should be adjusted and maintained according to

the manufacturers recommendations.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation

to deal with the WEEE in accordance with the WEEE regulations in relation

to the treatment, recycling & recovery and environmentally sound disposal

of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing Waste

Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

If disposing of this product or any damaged components, do not dispose of with

general waste. This product contains valuable raw materials. Metal products should

be taken to your local civic amenity site for recycling of metal products.