User Guide

EVAL-AD74413R-DIOZ

EVALUATION BOARD SOFTWARE

analog.com

Rev. 0 | 4 of 9

SOFTWARE PREREQUISITES

Before connecting the USB2PMB2 board to the PC, the following

two prerequisites must be met for correct evaluation kit behavior.

FTDI D2XX Direct Drivers

The USB2PMB2 board depends on the FTDI D2XX direct drivers

to communicate correctly with Windows®. Before connecting the

USB2PMB2 board to the PC or installing the AD74413R_DIOZ

software, install the FTDI D2XX direct drivers.

These drivers can be downloaded from the FTDI website.

.NET Framework 4.8 Runtime

The AD74413R-DIOZ software GUI uses several .NET library com-

ponents. Before installing the AD74413R-DIOZ software, confirm

that your system has the .NET Framework 4.8 runtime installed.

The .NET Framework 4.8 runtime can be downloaded directly from

the Microsoft website.

The .NET Framework 4.8 developer pack is not required to run the

AD74413R-DIOZ software.

INSTALLING THE AD74413R-DIOZ SOFTWARE

Download the evaluation software from the EVAL-AD74413R-DIOZ

web page. Run the AD74413R_DIOZ_setup.exe file. Once the

installation is complete, restart the PC before opening the software.