| Electronic Components Datasheet Search |
|
7220 Datasheet(PDF) 216 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7220 Datasheet(HTML) 216 Page - Renesas Technology Corp |
|
216 / 303 page ![]() APPLICATION 5.5 Example of I2C-BUS control by software (M37220M3-XXXSP/FP) 7220 Group User’s Manual 5-43 s SHARPNESS, CONTRAST, TINT, COLOR, BRIGHT Data is set to change the picture data. Some TVs have a picture mode function (such as the movie mode, standard mode), the fixed data is set according to the mode. Accordingly, it is necessary to change the picture data when changing the picture mode. s DEFEAT This switch turns DEFEAT off when AFT is on, and vice versa. s TV/EXT This selects either a TV’s signal or an external device’s signal. This bit should be set to “0” when TV’s signal is selected and set to “1” when an external device’s signal is selected. s AUTO This determines whether the automatic determination of the color system is used or not. When AUTO is “0,” manual determination is set; when “1,” determination is performed automatically. s 3.58/NTSC/SECAM When setting AUTO (bit 5 at sub-address 0616, write data) to “1,” these bits are automatically set inside the M52340SP. When setting AUTO to “0,” it is necessary to set the data shown in Table 5.5.10, according to the color system. s H PHASE The picture’s horizontal position is adjusted. Data is given every 50 Hz or 60 Hz and the data is set when frequency changes. For wide TVs etc., data is given for each screen size mode, and the data is set when the screen size mode changes. s DRIVE R, DRIVE B Data is used to adjust the output amplitude ratio of R, G and B signals. Since G is the fixed data, its ratio is adjusted by R and B. s MUTE This is the video mute ON/OFF switch. s CUT OFF R, CUT OFF G, CUT OFF B Data is used to adjust the output DC level of R, G and B signals. s F TRAP This register performes the fine adjustments to the trap frequency of TRAP for Y/C separation. Color system PAL SECAM NTSC3.58 NTSC4.43 D1 NTSC 0 0 1 1 D0 SECAM 0 1 0 0 Table 5.5.10 Setting of color system (at sub-address 0916, write data) D2 3.58 0 0 1 0 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |