WARP11 datasheet(16/19 Pages) STMICROELECTRONICS

16 / 19 page

W.A.R.P. Application Development Board

The board has been designed to be connected to

the RS232 port of an IBM PC 386 (or higher), but

it can also work stand alone. Inputs and outputs are

provided at TTL compatible level. The board allows

the user to charge the rules and the membership

functions (see W.A.R.P.-SDT User Manual) into the

W.A.R.P. memories.

It can manage up to 16 inputs and 16 outputs.

The clock generatorfrequency on board is 24MHz.

An automatic trigger is used to synchronize

W.A.R.P. with the external environment (working

connected with a PC).

When the board is used as a stand alone device all

the fuzzy data (membership functions and rules)

are stored in EPROMs. The board allows the stand-

alone/PC working to be selected by setting a switch

(see W.A.R.P.-SDT User Manual). A block diagram

of the board is described in figure 12.

Figure 12. Board Block Diagram

16/15

16/19

W.A.R.P.1.1

WARP11 Datasheet(PDF) 16 Page - STMicroelectronics