SN75971B

SCSI DIFFERENTIAL CONVERTER-DATA

SLLS322A – NOVEMBER 1999 – REVISED JANUARY 2000

5

POST OFFICE BOX 655303

– 0.3 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential bus voltage range (B side)

–10 V to 15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Single-ended bus voltage range (A side and control inputs)

– 0.3 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation (see Note 2)

Internally Limited (see Dissipation Rating Table)

. . . . . . . . . .

Electrostatic discharge (see Note 3): Class 2 A (all pins)

4 kV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Class 2 B (all pins)

400 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Class 3 A (B-side and GND)

12 kV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Class 3 B (B-side and GND)

400 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values are with respect to GND.

2. The maximum operating junction temperature is internally limited. Use the dissipation rating table to operate below this temperature.

3. This absolute maximum rating is tested in accordance with MIL-STD-883C, Method 3015.7.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING FACTOR‡

ABOVE TA = 25°C

TA = 70°C

POWER RATING

DGG

3333 mW

26.7 mW/

°C

2133 mW

DL

3709 mW

29.7 mW/

°C

2374 mW

‡ This is the inverse of the traditional junction-to-case thermal resistance (RθJA) for

High-K (per JEDEC) PCB installations.

recommended operating conditions

MIN

NOM

MAX

UNIT

Supply voltage, VCC

4.75

5

5.25

V

High-level input voltage, VIH

A side and control

2

V

Low-level input voltage, VIL

A side and control

0.8

V

Voltage at any bus terminal (separately or common-mode), VO or VI

B side

12

–7

V

High-level output current, IOH

A side

–16

mA

Low-level output current, IOL

A side

16

mA

Operating case temperature, TC

0

125

°C

Operating free-air temperature, TA

0

70

°C