IDTUS8032

LOW POWER DUAL SPST HI-SPEED USB 2.0 (480MBPS) SWITCH

USB SWITCH

IDT™ LOW POWER DUAL SPST HI-SPEED USB 2.0 (480MBPS) SWITCH

3

IDTUS8032

REV F 080907

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the IDTUS8032. These ratings, which are

standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these

or any other conditions above those indicated in the operational sections of the specifications is not implied.

Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical

parameters are guaranteed only over the recommended operating temperature range. All voltages referenced to

ground.

Note 1: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings

are observed. DC switch voltage may never exceed 3.6 V.

Note 2: Control input must be held HIGH or LOW and it must not float.

Symbol

Parameter

Rating

Supply Voltage

-0.5 V to 5.5 V

-0.5 V to 5.5 V

HSD

D+, D-

-0.5 V to 4.6 V

DC Input Diode Current

-50 mA

DC Output Current

50 mA

Storage Temperature

-65°C to 150°C

ESD (Human Body Mode)

All Pins

I/O to GND

7.5 kV

8 kV

Symbol

Parameter

Rating

Supply Voltage

3.0 V to 3.6 V

DC Switch Voltage

DC Input Diode Current

Storage Temperature

-40°C to +85°C