STM32F100C6 datasheet(22/84 Pages) STMICROELECTRONICS

Part #	STM32F100C6

Description	Low & medium-density value line, advanced ARM-based 32-bit MCU Low & medium-density value line, advanced ARM-based 32-bit MCU

PDF	84 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

22 / 84 page

Description

STM32F100x4, STM32F100x6, STM32F100x8, STM32F100xB

22/84

Doc ID 16455 Rev 2

Eight DAC trigger inputs are used in the STM32F100xx. The DAC channels are triggered

through the timer update outputs that are also connected to different DMA channels.

2.25

Temperature sensor

The temperature sensor has to generate a voltage that varies linearly with temperature. The

conversion range is between 2 V < VDDA < 3.6 V. The temperature sensor is internally

connected to the ADC1_IN16 input channel which is used to convert the sensor output

voltage into a digital value.

2.26

Serial wire JTAG debug port (SWJ-DP)

The ARM SWJ-DP Interface is embedded, and is a combined JTAG and serial wire debug

port that enables either a serial wire debug or a JTAG probe to be connected to the target.

The JTAG TMS and TCK pins are shared respectively with SWDIO and SWCLK and a

specific sequence on the TMS pin is used to switch between JTAG-DP and SW-DP.

STM32F100C6 Datasheet(PDF) 22 Page - STMicroelectronics