| Electronic Components Datasheet Search |
|
PT2215 Datasheet(PDF) 8 Page - Princeton Technology Corp |
|
|
|||||||||||||||||||||||||||||
PT2215 Datasheet(HTML) 8 Page - Princeton Technology Corp |
|
8 / 16 page ![]() Tel: 886-2-66296288 Fax: 886-2-29174598 URL: http://www.princeton.com.tw PT2215 V1.1 - 8 - April, 2006 Infrared Remote Control Transmitter IC PT2215 In the first 8 time slots, the drive line -- /KO0 is set to “LOW”. During this time, the 8 sense lines -- KI0 to KI7 are sequentially tested. In the next 8 time slots, the drive line -- KO1 is set to “LOW” and during this time, the 8 sense lines are sequentially tested. The same thing occurs for the succeeding 8 time slots /KO2, /KO3, /KO4, /KO5 or /KO6 are set to “LOW”. After testing, there are 8 time slots when all drive lines are “HIGH”. When one of the sense lines of time slots 0 to 63 is set to “LOW”, the contents of the 6 bits are stored in the key register which is used to address the ROM. When two or more keys are activated, no transmission occurs. Under this condition which is the same as “No Key”, the control bit in the command word for the next transmission will be toggled. When no keys is pressed the oscillation is terminated at the of the control timer. Under this condition, all drive lines will be set to “0”. When one of the keys is pressed once again, the oscillation is start, thus, a wake up will occur. SYSTEM OPTIONS PT2215 provides two system options: single system and the Multi-System. SINGLE SYSTEM In a single system, the KI0 must be connected to the ground or to one of the drive lines. The bank selected is the equivalent to the drive line number to which the KI0 is connected. When the KI0 is connected to the ground, the bank selected is 7. The bank select flip-flops are loaded with the contents of control timer’s C5 to C7 when the KI0 is set to “0”. It is therefore possible to have two different systems in one transmitter by using a side switch. It must be noted that KI0 cannot be used to connect keys, thus the maximum number of keys for a 20-pin package is 49. MULTI-SYSTEM In a multi-system, the bank is selected via key selection. A maximum of eight (8) different systems (i.e. TV, VCR, CD, DVD, etc.) is supported. When the system in initialized (i.e. user inserts new battery), the default bank is always Bank 7. If only bank 7 is set, the maximum number of keys for a 20-pin package is 56. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |