DQ965GF datasheet(32/104 Pages) INTEL

32 / 104 page

Intel Desktop Board DQ965GF Technical Product Specification

1.7.4

Parallel IDE Interface

The Parallel ATA IDE controller has one bus-mastering Parallel ATA IDE interface. The

Parallel ATA IDE interface supports the following modes:

•

Programmed I/O (PIO): processor controls data transfer.

•

8237-style DMA: DMA offloads the processor, supporting transfer rates of up to

16 MB/sec.

•

Ultra DMA: DMA protocol on IDE bus supporting host and target throttling and

transfer rates of up to 33 MB/sec.

•

ATA-66: DMA protocol on IDE bus supporting host and target throttling and

transfer rates of up to 66 MB/sec. ATA-66 protocol is similar to Ultra DMA and is

device driver compatible.

•

ATA-100: DMA protocol on IDE bus allows host and target throttling. The ATA-100

logic can achieve read transfer rates up to 100 MB/sec and write transfer rates up

to 88 MB/sec.

•

ATA-133: DMA protocol on IDE bus allows host and target throttling. The ATA-133

logic is designed to achieve read transfer rates up to 133 MB/sec and write transfer

rates in excess of 100 MB/sec.

NOTE

ATA-66, ATA-100, and ATA-133 are faster timings and require a specialized cable to

reduce reflections, noise, and inductive coupling.

The Parallel ATA IDE interface also supports ATAPI devices (such as CD-ROM drives)

and ATA devices. The BIOS supports Logical Block Addressing (LBA) and Extended

Cylinder Head Sector (ECHS) translation modes. The drive reports the transfer rate

and translation mode to the BIOS.

For information about

Refer to

The location of the Parallel ATA IDE connector

Figure 16, page 58

1.7.5

Real-Time Clock, CMOS SRAM, and Battery

A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When

the computer is not plugged into a wall socket, the battery has an estimated life of

three years. When the computer is plugged in, the standby current from the power

supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at

25 ºC with 3.3 VSB applied.

NOTE

If the battery and AC power fail, custom defaults, if previously saved, will be loaded

into CMOS RAM at power-on.

When the voltage drops below a certain level, the BIOS Setup program settings stored

in CMOS RAM (for example, the date and time) might not be accurate. Replace the

battery with an equivalent one. Figure 1 on page 14 shows the location of the battery.

DQ965GF Datasheet(PDF) 32 Page - Intel Corporation

DQ965GF Datasheet(HTML) 32 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL