VTM3 Data Sheet

Vectron International 267 Lowell Rd, Hudson NH 03051

Tel: 1-88-VECTRON-1

e-mail: vectron@vectron.com

Outline Diagrams, Pad Layout and Pin Out

Contact Pads are gold over nickel

Devices will be marked with the frequency

Pin 2,5,6,7,8 are used to program and adjust the TCXO during manufacturing and should be left open; do

not terminate these to the supply voltage and are a “make no connection” pad.

Figure 3, Package drawing

Pin 1, Ground or VC

Pin 2, NC

Pin 3, Ground

Pin 4, Output

Pin 5, NC

Pin 6, VCC

Pin 7, NC

Pin 8, NC