www.austriamicrosystems.com/AS8510

Revision 3.4

20 - 46

AS8510

Datasheet - Detailed Descr i p ti on

Figure 5. Normal Mode 1

7.4.2 Normal Mode 2 (NOM2)

threshold, the data rate is changed to the rate of NOM1 mode.

Transition to NOM2 occurs when the “START BIT” D0 of Mode Control register MOD_CTL_REG in Table 33 is set to 1 and mode control bits to

secs with a pulse width of eight cycles of lp_clk. The data is stable up to the next interrupt. The data sample is compared against the

programmed threshold and when it is exceeded, the data sampling rate is changed to provide data at the data rate of NOM1 mode. However, as

functionality is illustrated in the waveform Figure 6.

Figure 6. Normal Mode 2

Sampling with f1

INT at f1 rate from

current channel

Current Channel

DATA Register

t

I

START

STOP

t

V,T

Sampling with f2

Voltage Channel

DATA Register

Interrupt from the current channel is at f1 rate which is integer multiple of f2 rate from voltage channel

t

Sampling with f

I

V,I,T

V,I,T

V,I,T

V,I,T

V,I,T

INT

T INT