MB3U, MB3U-I2C

BiSS TO PC-USB ADAPTER

Rev B2, Page 4/7

APPLICATION SOFTWARE

BiSS software for PCs running on Windows operating systems, as well as the required USB driver are available

as a ZIP file. Download from http://www.ichaus.de/product.php?prod=MB3A/MB3U

Installation

After unzipping the "BiSS_xx.zip", the following files are located in the selected directory.

(xx is a placeholder for revisions)

→ BiSS_xx.msi

→ mb3u_usb_driver.exe

→ mb3_lpt_driver.exe

→ readme.txt

Note: Administrator rights are required to run installation.

1. The installation of the software starts by executing the "BiSS_xx.msi" installation package. Follow the on-

screen instructions to finish the installation procedure.

2. USB driver need to be installed to access the BiSS PC Adapter. Execute the mb3u_usb_driver.exe installation

package and follow the on-screen instructions. This process can take a few minutes.

3. Installation will make the software "BiSS_xx.exe" available in the selected working directory. The execution of

this file will start the software. Figure 4 shows a screenshot of the start up window.

File "idbiss6943.xml" is a BiSS device description file for BiSS slave ICs of iC-Haus. Please contact the man-

ufacturer of your sensor for an appropriate device description file or set the transmission parameters yourself

later.

Figure 4: Screenshot