AFS090 datasheet(327/334 Pages) MICROSEMI

327 / 334 page

Fusion Family of Mixed Signal FPGAs

R e visio n 2

5 - 11

Advance v0.8

(continued)

The "ADC Description" section was updated to include information about the

SAMPLE and BUSY signals and the maximum frequencies for SYSCLK and

ADCCLK. EQ 2 was updated to add parentheses around the entire expression in the

denominator.

2-102

Table 2-46 · Analog Channel Specifications and Table 2-47 · ADC Characteristics in

Direct Input Mode were updated.

2-118,

2-121

The note was removed from Table 2-55 • Analog Multiplexer Truth Table—AV (x = 0),

AC (x = 1), and AT (x = 3).

2-131

Table 2-63 • Internal Temperature Monitor Control Truth Table is new.

2-132

The "Cold-Sparing Support" section was updated to add information about cases

where current draw can occur.

2-143

Figure 2-104 • Solution 4 was updated.

2-147

Table 2-75 • Fusion Standard I/O Standards—OUT_DRIVE Settings was updated.

2-153

The "GNDA Ground (analog)" section and "GNDAQ Ground (analog quiet)" section

were updated to add information about maximum differential voltage.

2-224

The "VAREF Analog Reference Voltage" section and "VPUMP Programming Supply

Voltage" section were updated.

2-226

The "VCCPLA/B PLL Supply Voltage" section was updated to include information

about the east and west PLLs.

2-225

The VCOMPLF pin description was deleted.

N/A

The "Axy Analog Input/Output" section was updated with information about

grounding and floating the pin.

2-226

The voltage range in the "VPUMP Programming Supply Voltage" section was

updated. The parenthetical reference to "pulled up" was removed from the

statement, "VPUMP

can be left floating or can be tied (pulled up) to any voltage

between 0 V and 3.6 V."

2-225

The "ATRTNx Temperature Monitor Return" section was updated with information

about grounding and floating the pin.

2-226

The following text was deleted from the "VREF I/O Voltage Reference" section: (all

digital I/O).

2-225

The "NCAP Negative Capacitor" section and "PCAP Positive Capacitor" section

were updated to include information about the type of capacitor that is required to

connect the two.

2-228

1 µF was changed to 100 pF in the "XTAL1 Crystal Oscillator Circuit Input".

2-228

The "Programming" section was updated to include information about VCCOSC.

2-229

The VMV pins have now been tied internally with the VCCI pins.

N/A

The AFS090"108-Pin QFN" table was updated.

3-2

The AFS090 and AFS250 devices were updated in the "108-Pin QFN" table.

3-2

The AFS250 device was updated in the "208-Pin PQFP" table.

3-8

The AFS600 device was updated in the "208-Pin PQFP" table.

3-8

The AFS090, AFS250, AFS600, and AFS1500 devices were updated in the "256-Pin

FBGA" table.

3-12

The AFS600 and AFS1500 devices were updated in the "484-Pin FBGA" table.

3-20

Revision

Changes

Page

AFS090 Datasheet(PDF) 327 Page - Microsemi Corporation

AFS090 Datasheet(HTML) 327 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL