SST48CF024 datasheet(42/60 Pages) SST

42 / 60 page

Data Sheet

CompactFlash Card

SST48CF008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 / 256

S71125-03-000

9/01

375

3.2.1.5.1 General Configuration

This field informs the host that this is a non-magnetic, hard sectored, removable storage device with a

transfer rate greater than 10 MByte/sec and is not MFM encoded.

3.2.1.5.2 Default Number of Cylinders

This field contains the number of translated cylinders in the default translation mode. This value will be

the same as the number of cylinders.

3.2.1.5.3 Default Number of Heads

This field contains the number of translated heads in the default translation mode.

3.2.1.5.4 Number of Unformatted Bytes per Track

This field contains the number of unformatted bytes per translated track in the default translation mode.

3.2.1.5.5 Number of Unformatted Bytes per Sector

This field contains the number of unformatted bytes per sector in the default translation mode.

3.2.1.5.6 Default Number of Sectors per Track

This field contains the number of sectors per track in the default translation mode.

3.2.1.5.7 Number of Sectors per Card

This field contains the number of sectors per CompactFlash card. This double word value is also the

first invalid address in LBA translation mode.

3.2.1.5.8 Memory Card Serial Number

The contents of this field are right justified and padded with spaces (20H).

3.2.1.5.9 Buffer Type

This field defines the buffer capability:

0002H: a dual ported multi-sector buffer capable of simultaneous data transfers to or from the host and

the CompactFlash card.

3.2.1.5.10 Buffer Size

This field defines the buffer capacity in 512 Byte increments. SST’s CompactFlash card has up to 8

sector data buffer for host interface.

3.2.1.5.11 ECC Count

This field defines the number of ECC bytes used on each sector in the Read and Write Long

commands.

3.2.1.5.12 Firmware Revision

This field contains the revision of the firmware for this product.

3.2.1.5.13 Model Number

This field contains the model number for this product and is left justified and padded with spaces (20H).

3.2.1.5.14 Read/Write Multiple Sector Count

This field contains the maximum number of sectors that can be read or written per interrupt using the

Read Multiple or Write Multiple commands. SST’s CompactFlash card can support up to 2 sectors for

Read Multiple or Write Multiple Commands.

SST48CF024 Datasheet(PDF) 42 Page - Silicon Storage Technology, Inc

SST48CF024 Datasheet(HTML) 42 Page - Silicon Storage Technology, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL