1

NEW

2010.8

Micro-USB connectors meeting requirements of USB 2.0 Standard

ZX Series

sOverview

Extremely small high reliability connectors complying with physical,

electrical and environmental requirements of Micro-USB standard

(USB 2.0).

Receptacles and plugs are available in a wide variety of mounting

and termination configurations, permitting their use in various

applications.

sFeatures

1. Size reduction

Compared with the standard Mini-B connectors, the size of ZX

connectors is reduced by approximately 60% while still allowing a

high-speed data transfer of 480 Mbps, specified in USB 2.0.

2. Receptacle styles

Two interface configurations: Micro-B and Micro-AB in standard,

mid-mount and reverse mounting styles.

SMT and through-hole (shell) PC board terminations

3. Plug styles

Corresponding to the receptacle styles, two interface configurations:

Micro-B and Micro-A, with direct wire or PCB wire soldering.

Several plug styles can be used for data transmission, earphone or

charging applications.

4. High durability

Unique contact and lock configuration assures high durability while

maintaining easy insertion / disconnection. Fully mated condition

(when mated with corresponding HRS connector) is confirmed by a

definite tactile sensation

Reverse

(Top mount)

Drop-in

(Mid-mount)

Standard

(Bottom mount)

USB 2.0 Hi-Speed (480 Mbps)

Eye pattern measurement results:

Measured with USB 2.0 cable 2.4 m long

500ps/div

TP2

Note: Contact us to ascertain whether a TID number has

been acquired for an individual product.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.