ADG801/ADG802

–4–

REV. PrE

PRELIMINARY TECHNICAL DATA

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the ADG801/ADG802 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

Analog Inputs

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . or 30 mA, Whichever Occurs First

Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 400 mA

Peak Current, S or D

. . . . . . . . . . . . . . . . . . . . . . . . . 800 mA

(Pulsed at 1 ms, 10% Duty Cycle Max)

Operating Temperature Range

Extended . . . . . . . . . . . . . . . . . . . . . . . –40°C to +125°C

Storage Temperature Range . . . . . . . . . –65°C to +150°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . +150°C

µSOIC Package, Power Dissipation . . . . . . . . . . . 315 mW

θ

. . . . . . . . . . . . . . . . . . 206°C/W

θ

. . . . . . . . . . . . . . . . . . . 44°C/W

SOT-23 Package, Power Dissipation . . . . . . . . . . 282 mW

θ

. . . . . . . . . . . . . . . . . 229.6°C/W

θ

. . . . . . . . . . . . . . . . . 91.99°C/W

Lead Temperature, Soldering (10seconds) . . . . . . . 300°C

IR Reflow, Peak Temperature . . . . . . . . . . . . . . . . . +220°C

ESD.....................................................................2kV

ORDERING GUIDE

Model

Temperature Range

Package Descriptions

Package Options

ADG801BRT

–40°C to +125°C

3 V, 5 V

S L B

SOT-23 (Plastic Surface Mount) RT-6

ADG801BRM

–40°C to +125°C

3 V, 5 V

S L B

µSOIC (Small Outline)

RM-8

ADG802BRT

–40°C to +125°C

3 V, 5 V

S M B

SOT-23 (Plastic Surface Mount) RT-6

ADG802BRM

–40°C to +125°C

3 V, 5 V

S M B

µSOIC (Small Outline)

RM-8

µSOIC packages is limited to 3 characters due to space constraints.

NOTES

may

cause permanent damage to the device. This is a stress rating only;

functional operation of the device at these or any other conditions above

those listed in the operational sections of this specification is not implied.

Exposure to absolute maximum rating conditions for extended periods

may affect device reliability. Only one absolute maximum rating may

be applied at any one time.

limited to the maximum ratings given.

Table I. Truth Table

ADG801 In

ADG802 In

Switch Condition

0

1

OFF

10

ON

PIN CONFIGURATIONS

6-Lead Plastic Surface Mount (SOT-23)

(RT-6)

TOP VIEW

(Not to Scale)

6

5

4

1

2

3

NC = NO CONNECT

D

S

GND

NC

IN

ADG801/

ADG802

8-Lead Small Outline

µµµµµSOIC

(RM-8)

TOP VIEW

(Not to Scale)

8

7

6

5

1

2

3

4

NC = NO CONNECT

D

NC

NC

S

GND

IN

NC

ADG801/

ADG802