TX6Q

Board highlights:

•

Highly integrated

•

Standard TX-DIMM pinout

•

as small as possible - only 31mm

•

3.3V I/O

The TX6 is a member of the TX module series, specially designed for

Freescales i.MX multimedia processors. TX modules are complete computers,

implemented on a board smaller than a credit card, and ready to be designed

into your embedded system. TX modules includes a Freescale® i.MX

processor, SDRAM and Flash memory. The integrated LCD-controller enables

direct connection of an LCD screen. The TX6 is specifically targeted at

embedded applications where size, high cpu-performance and cost are critical

factors.

Computer on module

•

Freescale® i.MX 6Quad up to 1 GHz

•

1GByte SDRAM (64bit) DDR3-1066

•

128 MByte NAND Flash memory

•

DIMM200-module (67,6mm x 31 mm x 4mm)

•

Operating temperature ranges (Processor junction temperature)

Extended Consumer Grade: -20°C ..105°C

Industrial Grade:

-40°C ..105°C

Automotive Grade:

-40°C ..125°C, AEC-Q100 Grade 3

Processor

The i.MX 6Dual and i.MX 6Quad processors represent

Freescale Semiconductor’s latest achievement in integrated

multimedia applications processors. These processors are

part of a growing family of multimedia-focused products

that offer high performance processing and are optimized

for lowest power consumption. The i.MX 6Dual and i.MX

6Quad processors feature Freescale’s advanced

implementation of the quad ARM Cortex™-A9 core, which

operates at speeds up to 1 GHz. They include 2D and 3D

graphics processors, 3D 1080p video processing, and

integrated power management. Each processor provides a

64-bit DDR3/LVDDR3/LPDDR2-1066 memory interface and

a number of other interfaces for connecting peripherals,

such as WLAN, Bluetooth™, GPS, hard drive, displays,

and camera sensors.

High Performance CPU : ARM Quad Cortex-A9

•

ARM Cortex-A9, with ARMv7™, Neon,

VFPv3 and Trustzone support

•

32K instruction and data L1 caches

and 256 KB to 1 MB of L2 cache

•

Multi-stream-capable HD video engine

delivering 1080p60 decode, 1080p30

encode and 3D video playback in HD

in high performance families

•

Superior 3D graphics performance with

up to quad shaders performing 200 MT/s

Separate 2D and/or Vertex acceleration

engines for an optimal user interface

experience

•

Stereoscopic image sensor support for 3D

imaging

Standard TX-DIMM pinout:

•

4-wire UARTs (x3)

•

LCD

•

I2C / PWM

•

Serial Audio Interfaces (x2)

•

4-wire SD-Card/SDIO

High-Speed communication interfaces incl. onboard Ethernet PHY / on-chip

USB PHY allows direct use of connectors/magnetics on the baseboard without

the need for additional logic:

•

10/100 Mbps Ethernet

•

480 Mbps USB OTG (Host or Device)

•

480 Mbps USB Host

Power Supply

The TX6 accepts an input voltage from various sources:

•

1-cell Li-Ion/Polymer (up to 4.2V)

•

5.0V USB supply or AC wall adapter

•

3.3V

Read more in our TX-Guide:

www.karo-electronics.com/TX-Guide

Ka-Ro electronics GmbH - Pascalstr. 22, D-52076 Aachen, Germany - Tel.: +49 2408 1402-0 (FAX -10)

www.karo-electronics.de

CPU

SDRAM

Flash

TX6Q/1000/1024S/128F

1024MB

128MB

TX6Q/1000/1024S/128F/LVDS

1024MB

128MB

Order Number

Temp. Grade

1GHz MCIMX6Q5

Quad Core Consumer

Extended

Consumer

1GHz MCIMX6Q5

Quad Core Consumer

Extended

Consumer