Copyright

© ANPEC Electronics Corp.

Rev. A.6 - Aug., 2012

APL3512

www.anpec.com.tw

3

Symbol

Parameter

Rating

Unit

VIN to GND Voltage

-0.3 ~ 6

V

VOUT to GND Voltage

-0.3 ~ 6

V

EN, ENB to GND Voltage

-0.3 ~ 6

V

SS to GND Voltage

-0.3 ~ 6

V

Continuous Output Current

Internally Limited

A

Maximum Junction Temperature

-40 ~ 150

Storage Temperature

-65 ~ 150

Maximum Lead Soldering Temperature, 10 Seconds

260

Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are

stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-

mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device

reliability.

Thermal Characteristics

Symbol

Parameter

Typical Value

Unit

θ

JA

Junction-to-Ambient Resistance in Free Air

(Note 2)

SOT-23-5

SOP-8

TDFN2x2-6

250

160

225

Note 2:

θ

Symbol

Parameter

Range

Unit

VIN Input Voltage

2.7 ~ 5.5

V

OUT Output Current

0 ~2

A

SS Pin Soft-Start Capacitor

(Note 4)

0.3 ~470

nF

Ambient Temperature

-40 ~ 85

Junction Temperature

-40 ~ 125

Note 3: Refer to the typical application circuit.

Note 4: Attaching a capacitor on SS pin can adjust the V

rate could become internally controlled as if no C