A3P030 datasheet(212/220 Pages) MICROSEMI

212 / 220 page

Datasheet Information

5-6

Revision 13

Revision 2 (cont’d)

The "ProASIC3 FPGAs Package Sizes Dimensions" table is new.

In the "ProASIC3 Ordering Information", the QN package measurements were

updated to include both 0.4 mm and 0.5 mm.

III

In the "General Description" section, the number of I/Os was updated from 288 to

300.

1-1

Packaging v1.2

The "QN68" section is new.

4-3

Revision 1 (Feb 2008)

DC and Switching

Characteristics v1.1

In Table 2-2 • Recommended Operating Conditions 1,2, TJ was listed in the

symbol column and was incorrect. It was corrected and changed to TA.

2-2

In Table 2-3 • Flash Programming Limits – Retention, Storage and Operating

Temperature1, Maximum Operating Junction Temperature was changed from

110°C to 100°C for both commercial and industrial grades.

2-2

The "PLL Behavior at Brownout Condition" section is new.

2-3

In the "PLL Contribution—PPLL" section, the following was deleted:

FCLKIN is the input clock frequency.

2-13

In Table 2-21 • Summary of Maximum and Minimum DC Input Levels, the note

was incorrect. It previously said TJ and it was corrected and changed to TA.

2-20

In Table 2-115 • ProASIC3 CCC/PLL Specification, the SCLK parameter and note

1 are new.

2-89

Table 2-125 • JTAG 1532 was populated with the parameter data, which was not

in the previous version of the document.

2-108

Packaging v1.1

In the "VQ100" A3P030 pin table, the function of pin 63 was incorrect and

changed from IO39RSB0 to GDB0/IO38RSB0.

4-19

Revision 0 (Jan 2008) This document was previously in datasheet v2.2. As a result of moving to the

handbook format, Actel has restarted the version numbers.

N/A

v2.2

(July 2007)

The M7 and M1 device part numbers have been updated in Table 1 • ProASIC3

Product Family, "I/Os Per Package", "Automotive ProASIC3 Ordering

Information", "Temperature Grade Offerings", and "Speed Grade and

Temperature Grade Matrix".

i, ii, iii,

iii, iv

The words "ambient temperature" were added to the temperature range in the

"Automotive ProASIC3 Ordering Information", "Temperature Grade Offerings",

and "Speed Grade and Temperature Grade Matrix" sections.

iii, iv

The TJ parameter in Table 3-2 • Recommended Operating Conditions was

changed to TA, ambient temperature, and table notes 4–6 were added.

3-2

v2.1

(May 2007)

In the "Clock Conditioning Circuit (CCC) and PLL" section, the Wide Input

Frequency Range (1.5 MHz to 200 MHz) was changed to (1.5 MHz to 350 MHz).

The "Clock Conditioning Circuit (CCC) and PLL" section was updated.

In the "I/Os Per Package" section, the A3P030, A3P060, A3P125, ACP250, and

A3P600 device I/Os were updated.

Table 3-5 • Package Thermal Resistivities was updated with A3P1000

information. The note below the table is also new.

3-5

Revision

Changes

Page

A3P030 Datasheet(PDF) 212 Page - Microsemi Corporation

A3P030 Datasheet(HTML) 212 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL