Data Sheet

Time Domain Characteristics

Characteristic

AWG5014C

AWG5012C

AWG5002C

Data Rate Characteristics

Data Rate

Bit rate is determined as "sample rate / 4 points per cycle", allowing full impairment generation

Bit rate (typical)

300 Mb/s

150 Mb/s

Rise/Fall Time Characteristics

Rise/Fall Time

Rise/Fall time measured at 10% to 90% levels

Tr/Tf

Normal: 1.4 ns

Direct: 0.95 ns

Rise Time Bandwidth

Rise-time bandwidth converted from rise-time (0.34/Tr, assumed Gaussian transition) characteristics

through analog output circuitry and cabling

Tr bandwidth (–1 dB) (typical)

Normal: 140MHz

Direct: 210MHz

Tr bandwidth (–3 dB) (typical)

Normal: 250 MHz

Direct: 370 MHz

Low-pass filter

Normal: Bessel Type, 50 and 100 MHz

Output Amplitude Characteristics

Amplitude

Amplitude levels are measured between differential outputs (+) and (–)

For single-ended output (+) the amplitude level will be one-half the levels below

Range

Resolution

1.0 mV

Accuracy

At 0.5V, withnooffset, ±(2% of amplitude ±2mV)

Offset

Range

Normal: ±2.25 V

Resolution

1.0 mV

Accuracy

At minimum amplitude, ±(2.0% of offset ±10 mV)