LM6171

www.ti.com

SNOS745C – MAY 1998 – REVISED MARCH 2013

LM6171 High Speed Low Power Low Distortion Voltage Feedback Amplifier

Check for Samples: LM6171

1

FEATURES

DESCRIPTION

The LM6171 is a high speed unity-gain stable voltage

23

•

(Typical Unless Otherwise Noted)

feedback amplifier. It offers a high slew rate of

•

Easy-To-Use Voltage Feedback Topology

3600V/

μs and a unity-gain bandwidth of 100 MHz

•

Very High Slew Rate: 3600V/

μs

while consuming only 2.5 mA of supply current. The

LM6171

has

very

impressive

AC

and

DC

•

Wide Unity-Gain-Bandwidth Product: 100 MHz

performance which is a great benefit for high speed

•

signal processing and video applications.

•

Low Supply Current: 2.5 mA

The ±15V power supplies allow for large signal

•

High CMRR: 110 dB

swings and give greater dynamic range and signal-to-

•

High Open Loop Gain: 90 dB

noise ratio. The LM6171 has high output current

drive, low SFDR and THD, ideal for ADC/DAC

•

Specified for ±15V and ±5V Operation

systems. The LM6171 is specified for ±5V operation

for portable applications.

APPLICATIONS

The LM6171 is built on TI's advanced VIP III

•

Multimedia Broadcast Systems

(Vertically Integrated PNP) complementary bipolar

•

Line Drivers, Switchers

process.

•

Video Amplifiers

•

•

ADC/DAC Buffers

•

HDTV Amplifiers

•

Pulse Amplifiers and Peak Detectors

•

Instrumentation Amplifier

•

Active Filters

CONNECTION DIAGRAM

Figure 1. Top View

8-Pin SOIC/PDIP

See Package Number D (SOIC) or

See Package Number P (PDIP)

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

PAL is a registered trademark of and used under lisence from Advanced Micro Devices, Inc..

3

All other trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 1998–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.