ADCS7477 datasheet(8/30 Pages) TI1

8 / 30 page

ADCS7476, ADCS7477, ADCS7478

SNAS192F – APRIL 2003 – REVISED MARCH 2013

www.ti.com

ADCS7476/ADCS7477/ADCS7478 Specifications

(1)

ADCS7478 Converter Electrical Characteristics (continued)

The following specifications apply for VDD = +2.7V to 5.25V, fSCLK = 20 MHz, fSAMPLE = 1 MSPS unless otherwise noted.

Boldface limits apply for TA = −40°C to +85°C: all other limits TA = 25°C, unless otherwise noted.

Symbol

Parameter

Conditions

Typical

Limits

Units

ISOURCE = 200 µA,

VOH

Output High Voltage

VDD −0.2

V (min)

VDD = +2.7V to +5.25V

VOL

Output Low Voltage

ISINK = 200 µA

0.4

V (max)

IOL

TRI-STATE Leakage Current

±10

µA (max)

COUT

TRI-STATE Output Capacitance

pF (max)

Output Coding

Straight (Natural) Binary

AC ELECTRICAL CHARACTERISTICS

fSCLK

Clock Frequency

MHz (max)

% (min)

SCLK Duty Cycle

% (max)

tTH

Track/Hold Acquisition Time

400

ns (max)

fRATE

Throughput Rate

See Applications Information

MSPS (min)

tAD

Aperture Delay

tAJ

Aperture Jitter

Figure 2. Timing Test Circuit

Timing Test Circuit ADCS7476/ADCS7477/ADCS7478 Timing Specifications

The following specifications apply for VDD = +2.7V to 5.25V, fSCLK = 20 MHz, Boldface limits apply for TA = −40°C to +85°C:

all other limits TA = 25°C, unless otherwise noted.

(1)

Symbol

Parameter

Conditions

Typical

Limits

Units

tCONVERT

16 x tSCLK

tQUIET

(2)

ns (min)

Minimum CS Pulse Width

ns (min)

CS to SCLK Setup Time

ns (min)

Delay from CS Until SDATA TRI-STATE

ns (max)

Disabled (3)

VDD = +2.7 to +3.6

ns (max)

Data Access Time after SCLK Falling

Edge(4)

VDD = +4.75 to +5.25

ns (max)

0.4 x

SCLK Low Pulse Width

ns (min)

tSCLK

0.4 x

SCLK High Pulse Width

ns (min)

tSCLK

VDD = +2.7 to +3.6

ns (min)

SCLK to Data Valid Hold Time

VDD = +4.75 to +5.25

ns (min)

(1)

All input signals are specified as tr = tf = 5 ns (10% to 90% VDD) and timed from 1.6V.

(2)

Minimum Quiet Time Required Between Bus Relinquish and Start of Next Conversion

(3)

Measured with the load circuit shown above, and defined as the time taken by the output to cross 1.0V.

(4)

Measured with the load circuit shown above, and defined as the time taken by the output to cross 1.0V or 2.0V.

Submit Documentation Feedback

Product Folder Links: ADCS7476 ADCS7477 ADCS7478

ADCS7477 Datasheet(PDF) 8 Page - Texas Instruments

ADCS7477 Datasheet(HTML) 8 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL