HMS81020TL datasheet(21/77 Pages) HYNIX

21 / 77 page

HMS81004E/08E/16E/24E/32E

JUNE 2001 Ver 1.00

[Zero flag Z]

This flag is set when the result of an arithmetic operation

or data transfer is "0" and is cleared by any other result.

Figure 8-4 PSW (Program Status Word) Register

[Interrupt disable flag I]

This flag enables/disables all interrupts except interrupt

caused by Reset or software BRK instruction. All inter-

rupts are disabled when cleared to "0". This flag immedi-

ately becomes "0" when an interrupt is served. It is set by

the EI instruction and cleared by the DI instruction.

[Half carry flag H]

After operation, this is set when there is a carry from bit 3

of ALU or there is no borrow from bit 4 of ALU. This bit

can not be set or cleared except CLRV instruction with

Overflow flag (V).

[Break flag B]

This flag is set by software BRK instruction to distinguish

BRK from TCALL instruction with the same vector ad-

dress.

[Direct page flag G]

This flag assigns RAM page for direct addressing mode. In

the direct addressing mode, addressing area is from zero

page 00H to 0FFH when this flag is "0". If it is set to "1",

addressing area is 1 Page. It is set by SETG instruction and

cleared by CLRG.

[Overflow flag V]

This flag is set to "1" when an overflow occurs as the result

of an arithmetic operation involving signs. An overflow

occurs when the result of an addition or subtraction ex-

ceeds +127(7FH) or -128(80H). The CLRV instruction

clears the overflow flag. There is no set instruction. When

the BIT instruction is executed, bit 6 of memory is copied

to this flag.

[Negative flag N]

This flag is set to match the sign bit (bit 7) status of the re-

sult of a data or arithmetic operation. When the BIT in-

struction is executed, bit 7 of memory is copied to this flag.

NEGATIVE FLAG

MSB

LSB

RESET VALUE : 00H

PSW

OVERFLOW FLAG

BRK FLAG

CARRY FLAG RECEIVES

ZERO FLAG

INTERRUPT ENABLE FLAG

CARRY OUT

HALF CARRY FLAG RECEIVES

CARRY OUT FROM BIT 1 OF

ADDITION OPERLANDS

SELECT DIRECT PAGE

when g=1, page is addressed by RPR

HMS81020TL Datasheet(PDF) 21 Page - Hynix Semiconductor

HMS81020TL Datasheet(HTML) 21 Page - Hynix Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

Datasheet Download

Link URL