7260 datasheet(2/3 Pages) ETC2

2 / 3 page

Peer-to-Peer and Master-Slave Support

The i.LON 600 LONWORKS/IP Server supports both peer-

to-peer and master-slave networks, allowing remotely located

devices to communicate over IP networks as if they were

co-located. Devices on different ﬂoors of a building, scattered

across different manufacturing pods, or located in retail

branches around the world can be seamlessly and transparently

linked together – and connected to far-ﬂung corporate data and

ERP networks.

Network Installation

The i.LON 600 LONWORKS/IP Server is installed using

standard LONWORKS installation tools such as the LonMaker

Integration Tool. For pre-conﬁgured LONWORKS installations,

the i.LON 600 LONWORKS/IP Server can be self-installed by

setting parameters on a set-up web page. Whether part of

an engineered or pre-conﬁgured system, the i.LON 600

LONWORKS/IP Server is the ideal means to connect everyday

devices through an IP-based network.

IT Manager Friendly

The i.LON 600 LONWORKS/IP Server behaves like a typical

IP host from the perspective of the IT network to which it is

connected. Like other IP hosts, the i.LON 600 LONWORKS/IP

Server supports standard internetworking protocols including

TCP/IP, DHCP, ICMP, SNTP, MD5, HTTP, and FTP.

Adjustable packet aggregation and bandwidth utilization para-

meters ensure that the i.LON 600 LONWORKS/IP Server is a

“good citizen” on the IP network. These parameters, as well as

addressing and security functions can all be adjusted via the IP

network.

Power Supply and Enclosure

Two power supply options enable the i.LON 600

LONWORKS/IP Server to operate from 90V -240V AC or DC,

or as a safety-agency approved low-voltage 24V AC or DC

device. The fully-isolated high-voltage power supply allows

Line-to-Line or Line-to-Neutral connections across the entire

voltage range.

The low-voltage option provides a number of unique

advantages:

M Powering the server from a 24VDC rechargeable power

supply permits non-stop operation in the event of a

power failure.

M Supporting both 24VAC or DC input power permits the

use of a wide range of power supplies including both

plug-in and hard-wired options.

M Eliminating high voltage wiring can reduce wiring

costs and eliminate the need for an insulated, protective

enclosure.

The i.LON 600 LONWORKS/IP Server is supplied in a

compact 8T DIN package manufactured from ﬂame-resistant

plastic, and is suitable for mounting to a 35mm DIN rail.

Screw terminals simplify power and LonTalk channel wiring

connections, while an array of front panel status LEDs provide

valuable information about the status of the server.

Specifications

Minimum PC Requirements

for Conﬁguration Server Software

Pentium II @ 600 MHz, 128KB RAM, 10MB free disk space

Processor

AMD Au1000 32-bit RISC

Channel Type

TP/FT-10 (Models 72601 & 72603)

TP/XF-1250 (Models 72602 & 72604)

LONWORKS Twisted Pair Connector

Screw Terminals

Ethernet Port

10/100 BaseT, auto-selecting, auto polarity

Ethernet Connector

RJ-45

Console Interface

EIA-232, 9600 baud (8 data bits, no parity, 1 stop bit)

Console Connector

DB-9

7260 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers

7260 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3

Datasheet Download

Link URL