Electronic Components Datasheet Search
  English  ▼

X  

MIC5018 Datasheet(PDF) 5 Page - Micrel Semiconductor

Part # MIC5018
Description  IttyBitty??High-Side MOSFET Driver Preliminary Information
PDF  7 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  MICREL [Micrel Semiconductor]
Direct Link  http://www.micrel.com
Logo MICREL - Micrel Semiconductor

MIC5018 Datasheet(HTML) 5 Page - Micrel Semiconductor

  MIC5018 Datasheet HTML 1Page - Micrel Semiconductor MIC5018 Datasheet HTML 2Page - Micrel Semiconductor MIC5018 Datasheet HTML 3Page - Micrel Semiconductor MIC5018 Datasheet HTML 4Page - Micrel Semiconductor MIC5018 Datasheet HTML 5Page - Micrel Semiconductor MIC5018 Datasheet HTML 6Page - Micrel Semiconductor MIC5018 Datasheet HTML 7Page - Micrel Semiconductor  
Zoom Inzoom in Zoom Outzoom out
 5 / 7 page
background image
1997
5-159
MIC5018
Micrel
5
Functional Description
Refer to the functional diagram.
The MIC5018 is a noninverting device. Applying a logic high
signal to CTL (control input) produces gate drive output. The
G (gate) output is used to turn on an external N-channel
MOSFET.
Supply
VS (supply) is rated for +2.7V to +9V. An external capacitor
is recommended to decouple noise.
Control
CTL (control) is a TTL compatible input. CTL must be forced
high or low by an external signal. A floating input may cause
unpredictable operation.
A high input turns on Q2, which sinks the output of current
source I1, making the input of the first inverter low. The
inverter output becomes high enabling the charge pump.
Charge Pump
The charge pump is enabled when CTL is logic high. The
charge pump consists of an oscillator and voltage quadrupler
Functional Diagram
CHARGE
PUMP
EN
VS
CTL
R2
15k
R1 2k
GND
G
MIC5018
+2.7V to +9V
On
Off
I1
20µA
D1
16V
D2
35V
Q1
Q2
Q3
D3 16V
Functional Diagram with External Components
(High-Side Driver Configuration)
(4
×). Output voltage is limited to 16V by a zener diode. The
charge pump output voltage will be approximately:
V
G = 4 × VSUPPLY – 2.8V, but not exceeding 16V.
The oscillator operates from approximately 70kHz to approxi-
mately 100kHz depending upon the supply voltage and
temperature.
Gate Output
The charge pump output is connected directly to the G (gate)
output. The charge pump is active only when CTL is high.
When CTL is low, Q3 is turned on by the second inverter and
discharges the gate of the external MOSFET to force it off.
If CTL is high, and the voltage applied to VS drops to zero, the
gate output will be floating (unpredictable).
ESD Protection
D1 and D2 clamp positive and negative ESD voltages. R1
isolates the gate of Q2 from sudden changes on the CTL
input. Q1 turns on if the emitter (CTL input) is forced below
ground to provide additional input protection. Zener D3 also
clamps ESD voltages for the gate (G) output.



Html Pages

1 2 3 4 5 6 7


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com