DLPR910

www.ti.com

DLPS065A – SEPTEMBER 2015 – REVISED OCTOBER 2015

Pin Functions (continued)

PIN

I/O

DESCRIPTION

NAME

NO.

D0

H6

O

DATA output pin to provide data for configuring the DLPC910 in serial mode.

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature (unless otherwise noted) (see

MIN

MAX

UNIT

Relative to ground

–0.5

2.7

V

I/O supply voltage

Relative to ground

–0.5

4.0

V

–0.5

3.6

V

Input voltage with respect to ground

–0.5

3.6

V

–0.5

3.6

V

Voltage applied to high-impedance output

–0.5

3.6

V

Junction temperature

125

°C

Storage temperature, ambient

–40

125

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

Maximum DC undershoot below GND must be limited to either 0.5 V or 10 mA. During transitions, the device pins can undershoot to –2

V or overshoot to 7 V, provided this overshoot or undershoot lasts less then 10 ns and with the forcing current being limited to 200 mA.

6.2 ESD Ratings

VALUE

UNIT

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all

(1)

Electrostatic discharge

2000

V

(1)

Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges in

to the device.

(2)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(3)

JEDEC Standard JESD22-A114A (C1 = 100 pF, R1 = 1500

Ω, R2 = 500 Ω).

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Internal voltage supply

1.65

1.8

2.0

V

Supply voltage for output drivers

3.3-V operation

3.0

3.3

3.6

Low-level input voltage

3.3-V operation

0

–

0.8

V

High-level input voltage

3.3-V operation

2.0

–

3.6

V

–

–

500

ns

Output voltage

0

–

V

Operating ambient temperature

–40

–

85

°C

6.4 Thermal Information

Refer to the XCF16P product specifications at www.xilinx.com.

6.5 Electrical Characteristics

Refer to the XCF16P product specifications at www.xilinx.com.

Copyright © 2015, Texas Instruments Incorporated

Submit Documentation Feedback

5

Product Folder Links: DLPR910