8

PI6CFGL601B

RevA

01/16/15

PI6CFGL601B

6-Output Low Power PCIE Gen 1-2-3 Clock Generator

All trademarks are property of their respective owners.

Supply Voltage to Ground Potential......................................................4.6V

Storage Temperature.......................................................... –65°C to +150°C

Juction Temperature ............................................................................ 125°C

Soldering Temperature.........................................................................260°C

ESD Protection (Input) ......................................................... 2000V (HBM)

Note: Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is a stress

rating only and functional operation of the device at these or any

other conditions above those indicated in the operational sections

of this specification is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect reliability.

Maximum Ratings

(Above which useful life may be impaired. For user guidelines, not tested.)

Electrical Characteristics–Current Consumption

T

o

C; Supply Voltage VDD = 3.3 V +/-10%; VDDO = 1.8V +/-10%, See Test Loads for loading conditions

Symbol

Parameters

Condition

Min. Typ. Max. Units

I

DD3.3

VDD, All outputs active @100MHz

50

65

mA

Notes:

1. Guaranteed by design and characterization, not 100% tested in production.

Electrical Characteristics–Output Duty Cycle, Jitter, and Skew Characteristics

T

o

C; Supply Voltage VDD = 3.3 V +/-10%; VDDO = 1.8V +/-10%, See Test Loads for Loading Conditions

Symbol

Parameters

Condition

Min. Typ. Max. Units

t

DC

Measured differentially, PLL Mode

45

55

%

tskew

VT = 50%

50

ps

t

jcyc-cyc

PLL mode

50

ps

Notes:

1. Guaranteed by design and characterization, not 100% tested in production.

2. Measured from differential waveform

Electrical Characteristics–Input/Supply/Common Output Parameters

T

o

C; Supply Voltage VDD = 3.3 V +/-10%; VDDO = 1.8V +/-10%

Symbol

Parameters

Condition

Min.

Typ.

Max.

Units

V

DD

Supply voltage for core, analog

3.0

3.3

3.6

V

V

DDO

Supply voltage outputs

1.65

1.8

2.0

V

V

IH

Single-ended inputs, except SMBus

0.65 V

DD

V

V

V

IL

Single-ended inputs, except SMBus

-0.3

0.35 V

DD

V

V

OH

Single-ended outputs, except SMBus. I

-2mA

V

V

V

OL

Single-ended outputs, except SMBus. I

-2mA

0.45

V

15-0018