LPC660

www.ti.com

SNOS554D – MAY 1998 – REVISED MARCH 2013

LPC660 Low Power CMOS Quad Operational Amplifier

Check for Samples: LPC660

1

FEATURES

DESCRIPTION

The LPC660 CMOS Quad operational amplifier is

2

•

Rail-to-rail output swing

ideal for operation from a single supply. It features a

•

Micropower operation: (1 mW)

wide range of operating voltages from +5V to +15V

•

Specified for 100 k

Ω and 5 kΩ loads

and features rail-to-rail output swing in addition to an

input common-mode range that includes ground.

•

High voltage gain: 120 dB

Performance limitations that have plagued CMOS

•

Low input offset voltage: 3 mV

amplifiers in the past are not a problem with this

•

Low offset voltage drift: 1.3

μV/°C

as voltage gain (into 100 k

Ω and 5 kΩ) are all equal

•

Ultra low input bias current: 2 fA

to or better than widely accepted bipolar equivalents,

•

while the power supply requirement is typically less

•

Operation range from +5V to +15V

than 1 mW.

•

Low distortion: 0.01% at 1 kHz

This chip is built with National's advanced Double-

•

Slew rate: 0.11 V/

μs

Poly Silicon-Gate CMOS process.

•

Full military temp. range available

See the LPC662 datasheet for a Dual CMOS

operational amplifier and LPC661 datasheet for a

APPLICATIONS

single CMOS operational amplifier with these same

features.

•

High-impedance buffer

•

Precision current-to-voltage converter

•

Long-term integrator

•

High-impedance preamplifier

•

Active filter

•

Sample-and-Hold circuit

•

Peak detector

Application Circuit

Oscillator frequency is determined by R1, R2, C1, and C2:

where R = R1 = R2 and C = C1 = C2.

Figure 1. Sine-Wave Oscillator

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 1998–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.