RN4871 datasheet(37/48 Pages) MICROCHIP

37 / 48 page

 2016 Microchip Technology Inc.

DS50002489A-page 37

RN4870/71

10.0 REGULATORY APPROVAL

This section outlines the regulatory information for the

RN4870/71 module for the following countries:

• United States

• Canada

• Europe

• Japan

• Korea

• Taiwan

• Other Regulatory Jurisdictions

10.1

United States

The RN4870/71 module has received Federal Commu-

nications Commission (FCC) CFR47 Telecommunica-

tions, Part 15 Subpart C “Intentional Radiators” single-

modular approval in accordance with Part 15.212 Mod-

ular Transmitter approval. Single-modular transmitter

approval is defined as a complete RF transmission

sub-assembly, designed to be incorporated into

another device, that must demonstrate compliance

with FCC rules and policies independent of any host. A

transmitter with a modular grant can be installed in dif-

ferent end-use products (referred to as a host, host

product, or host device) by the grantee or other equip-

ment manufacturer, then the host product may not

require additional testing or equipment authorization

for the transmitter function provided by that specific

module or limited module device.

A host product itself is required to comply with all other

applicable FCC equipment authorization regulations,

requirements, and equipment functions that are not

associated with the transmitter module portion. For

example, compliance must be demonstrated: to regula-

tions for other transmitter components within a host

product; to requirements for unintentional radiators

(Part 15 Subpart B), such as digital devices, computer

peripherals, radio receivers, etc.; and to additional

authorization requirements for the non-transmitter

functions on the transmitter module (i.e., Verification or

Declaration of Conformity) as appropriate (e.g., Blue-

tooth and Wi-Fi transmitter modules may also contain

digital logic functions).

10.1.1

LABELING AND USER

INFORMATION REQUIREMENTS

The RN4870 module has been labeled with its own

FCC ID number, and if the FCC ID is not visible when

the module is installed inside another device, then the

outside of the finished product into which the module is

installed must also display a label referring to the

enclosed module. This exterior label can use wording

as follows:

For the RN4870 module:

Due to the limited size of the RN4871, the FCC Identi-

fier (FCC ID) is not displayed on the module. Therefore,

the FCC ID must be placed on the outside of the fin-

ished product into which the module is installed must

also display a label referring to the enclosed module.

This exterior label can use wording as follows:

For the RN4871 module:

Contains Transmitter Module

FCC ID: A8TBM70ABCDEFGH

Contains FCC ID: A8TBM70ABCDEFGH

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Contains Transmitter Module

FCC ID: A8TBM71S2

Contains FCC ID: A8TBM71S2

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

RN4871 Datasheet(PDF) 37 Page - Microchip Technology

RN4871 Datasheet(HTML) 37 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Download

Link URL