RN4871 datasheet(39/48 Pages) MICROCHIP

39 / 48 page

 2016 Microchip Technology Inc.

DS50002489A-page 39

RN4870/71

User Manual Notice for License-Exempt Radio Appara-

tus (from Section 8.4, RSS-Gen, Issue 4, November

2014): User manuals for license-exempt radio appara-

tus shall contain the following or equivalent notice in a

conspicuous location in the user manual or alterna-

tively on the device or both:

10.2.2

RF EXPOSURE

All transmitters regulated by IC must comply with RF

exposure requirements listed in RSS-102 - Radio Fre-

quency (RF) Exposure Compliance of Radiocommuni-

cation Apparatus (All Frequency Bands).

10.2.3

HELPFUL WEB SITES

Industry Canada: http://www.ic.gc.ca/

10.3

Europe

The RN4870/71 module is an R&TTE Directive

assessed radio module that is CE marked and has

been manufactured and tested with the intention of

being integrated into a final product.

The RN4870/71 module has been tested to R&TTE

Directive 1999/5/EC Essential Requirements for Health

and Safety (Article (3.1(a)), Electromagnetic Compati-

bility (EMC) (Article 3.1(b)), and Radio (Article 3.2) and

are summarized in Table 10-1 and Table 10-2 Euro-

pean Compliance Testing. A Notified Body Opinion has

also been issued. All test reports are available on the

RN4870/71 product web page at http://www.micro-

chip.com.

The R&TTE Compliance Association provides guid-

ance on modular devices in document Technical

Guidance Note 01 available at

http://www.rtteca.com/html/download_area.htm.

10.3.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the

RN4870/71 module must follow CE marking require-

ments. The R&TTE Compliance Association Technical

Guidance Note 01 provides guidance on final product

CE marking.

This device complies with Industry Canada's license-

exempt RSSs. Operation is subject to the following

two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, includ-

ing interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d'Indus-

trie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux con-

ditions suivantes:

(1) l'appareil ne doit pas produire de brouillage;

(2) l'utilisateur de l'appareil doit accepter tout brouil-

lage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

Note:

To maintain conformance to the testing

listed in Table 10-1, the module shall be

installed in accordance with the installa-

tion instructions in this data sheet and

shall not be modified.

When integrating a radio module into a

completed

product

the

integrator

becomes the manufacturer of the final

product and is therefore responsible for

demonstrating compliance of the final

product with the essential requirements of

the R&TTE Directive.

RN4871 Datasheet(PDF) 39 Page - Microchip Technology

RN4871 Datasheet(HTML) 39 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Download

Link URL