RN4871 datasheet(38/48 Pages) MICROCHIP

38 / 48 page

RN4870/71

DS50002489A-page 38

 2016 Microchip Technology Inc.

A user’s manual for the product should include the fol-

lowing statement:

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748 available at the FCC Office of Engi-

neering and Technology (OET) Laboratory Division

Knowledge Database (KDB)

http://apps.fcc.gov/oetcf/kdb/index.cfm.

10.1.2

RF EXPOSURE

All transmitters regulated by FCC must comply with RF

exposure requirements. KDB Publication 447498 Gen-

eral RF Exposure Guidance provides guidance in

determining whether proposed or existing transmitting

facilities, operations or devices comply with limits for

human exposure to Radio Frequency (RF) fields

adopted by the Federal Communications Commission

(FCC).

Output power listed is conducted. This grant is valid

only when the module is sold to OEM integrators and

must be installed by the OEM or OEM integrators. This

transmitter is restricted for use with the specific

antenna(s) tested in this application for Certification

and must not be co-located or operating in conjunction

with any other antenna or transmitters within a host

device, except in accordance with FCC multi-transmit-

ter product procedures. This module is approved for

installation into mobile or/and portable host platforms.

10.1.3

HELPFUL WEB SITES

Federal Communications Commission (FCC):

http://www.fcc.gov

FCC Office of Engineering and Technology (OET) Lab-

oratory Division Knowledge Database (KDB):

http://apps.fcc.gov/oetcf/kdb/index.cfm

10.2

Canada

The RN4870/71 module has been certified for use in

Canada under Industry Canada (IC) Radio Standards

Procedure

(RSP)

RSP-100,

Radio

Standards

Specification (RSS) RSS-Gen, RSS-210, and RSS-

247. Modular approval permits the installation of a

module in a host device without the need to recertify

the device.

10.2.1

LABELING AND USER

INFORMATION REQUIREMENTS

Labeling Requirements (from RSP-100 - Issue 10,

Section 3): The host device shall be properly labeled to

identify the module within the host device.

Modular Devices (from RSP-100 - Issue 10, Section 7):

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words “Contains transmit-

ter module”, or the word “Contains”, or similar wording

expressing the same meaning, as follows:

For the RN4870 module:

Due to the limited size of the RN4871, the Industry

Canada certification number is not displayed on the

module. Therefore, the host device must be labeled to

display the Industry Canada certification number of the

module, preceded by the words “Contains transmitter

module”, or the word “Contains”, or similar wording

expressing the same meaning, as follows:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equip-

ment generates, uses and can radiate radio fre-

quency energy, and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the follow-

ing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV

technician for help.

Contains transmitter module

IC: 12246A-BM70BLES1F2

Contains transmitter module

IC: 12246A-BM71S2

RN4871 Datasheet(PDF) 38 Page - Microchip Technology

RN4871 Datasheet(HTML) 38 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Download

Link URL