409-2426

PneumaticTools 68068 and 68068-1

Rev A

6 of 17

Tyco Electronics Corporation

Figure 4

Cam in Neutral Position

Piston

Terminal or

Splice

Air Pressure

Air Exhaust

Return Side

Detail A

Detail B

Jaws in Crimp

Position (Closed)

Cam Advanced

Power Side

Physical and Functional Description

Jaws Open

Control Button

Air Hose

3. INSTALLING AND REMOVING JAW ASSEMBLY

3.1. Installing Jaw Assembly

1. DISCONNECT the tool from the air supply.

To prevent personal injury, ALWAYS DISCONNECT the tool from the air supply when installing the jaw assembly.

2. Refer to Figure 5, and select the applicable jaw assembly for the terminal or splice and wire size

being crimped. For detailed information about the jaw assembly, refer to the instruction sheet listed.

The jaw assembly is coated with a preservative to prevent rust and corrosion. Wipe the preservative from the jaws,

particularly from the crimping area.

DANGER

NOTE

i