DS76KHZ datasheet(4/5 Pages) DALLAS

Part #	DS76KHZ

Description	76.8 kHz TCXO

PDF	5 Pages

Scroll/Zoom	100%

Manufacturer	DALLAS [Dallas Semiconductor]

Direct Link	https://www.maximintegrated.com/en.html

Logo

4 / 5 page

DS76KHz

4 of 5

NOTES:

1. All voltages are referenced to ground.

2. Typical values are at +25°C and nominal supplies.

3. This current is the active mode current sourced from the backup supply/battery.

4. These parameters are measured using a 15 pF load.

5. DS76KHz-N is tested over the industrial temperature range to meet the specifications above.

6. These parameters are measured with VCC on under nominal operating conditions.

7. When VCC is grounded VBAT can operate from 2.7V to 5.5V. Freq. stability will be affected in this

operation, typically 1PPM/Volt above or below 3.0V.

8. These parameters are measured under no load conditions. The difference between ICC and IBAT is due

to power switching circuitry.

9. Typical crystal aging is

±1 ppm/yr after reflow.

76KHz OUTPUT WAVEFORM

MECHANICAL DIMENSIONS

DS76KHZ Datasheet(PDF) 4 Page - Dallas Semiconductor