Circuit Note

CN-0269

Rev. 0 | Page 12 of 12

LEARN MORE

CN-0269 Design Support Package:

http://www. analog. com/CN0269-DesignSupport

UG-277 User Guide, SDP-B User Guide, Analog Devices.

Alan, Walsh. Front-End Amplifier and RC Filter Design for a

Precision SAR Analog-to-Digital Converter, Analog Dialogue

46-12, December 2012.

Ardizzoni, John. A Practical Guide to High-Speed Printed-Circuit-

Board Layout, Analog Dialogue 39-09, September 2005.

Kester, Walt, Data Conversion Handbook, Chapter 8, Section

8.2, Multichannel Data Acquisition Systems, Elsevier.

Manning, Michael. Switch and Multiplexer Design

Considerations for Hostile Environments, Ask the

Applications Engineer-40, Analog Dialogue, Volume 45,

May 2011.

AN-359 Application Note, Settling time of Operational

Amplifiers, Analog Devices.

AN-931, Application Note, Understanding PulSAR ADC

Support Circuitry, Analog Devices.

AN-1024 Application Note, How to Calculate the Settling Time

and Sampling Rate of a Multiplexer, Analog Devices.

MT-004 Tutorial, The Good, the Bad, and the Ugly Aspects of

ADC Input Noise—Is No Noise Good Noise? Analog Devices.

MT-031 Tutorial, Grounding Data Converters and Solving the

Mystery of “AGND” and “DGND”, Analog Devices.

MT-035, Op Amp Inputs, Outputs, Single-Supply, and Rail-to-

Rail Issues, Analog Devices.

MT-046 Tutorial, Op Amp Settling Time, Analog Devices.

MT-048 Tutorial, Op Amp Noise Relationships: 1/f Noise, RMS

Noise, and Equivalent Noise Bandwidth, Analog Devices.

MT-074 Tutorial, Differential Drivers for Precision ADCs,

Analog Devices.

MT-088 Tutorial, Analog Switches and Multiplexers, Analog

Devices.

MT-101 Tutorial, Decoupling Techniques, Analog Devices.

Data Sheets and Evaluation Boards

CN-0269 Circuit Evaluation Board (EVAL-CN0269-SDPZ)

System Demonstration Platform (EVAL-SDP-CB1Z)

AD8065 Data Sheet

AD8475 Data Sheet

ADG5208 Data Sheet

ADG5236 Data Sheet

AD7984 Data Sheet

ADR444 Data Sheet

REVISION HISTORY

11/13—Revision 0: Initial Version

(Continued from first page) Circuits from the Lab circuits are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors. While you

may use the Circuits from the Lab circuits in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual property by

application or use of the Circuits from the Lab circuits. Information furnished by Analog Devices is believed to be accurate and reliable. However, Circuits from the Lab circuits are supplied

"as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability, noninfringement or fitness for a particular

purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties that may result from their use. Analog Devices

reserves the right to change any Circuits from the Lab circuits at any time without notice but is under no obligation to do so.

©2013 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective owners.

CN10563-0-11/13(0)