| Electronic Components Datasheet Search |
|
WM8608 Datasheet(PDF) 16 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8608 Datasheet(HTML) 16 Page - Wolfson Microelectronics plc |
|
16 / 54 page ![]() WM8608 Product Preview w PP Rev 1.5 March 2004 16 Parameter Group Delay Unit fs=48kHz Unit FL/FR/FC/SL/SR/RC channel 47 samples 1.0 ms SUB channel 22 samples 0.5 ms Table 9 Signal Path Group Delay Key: FL = Front-Left, FR = Front-Right, FC = Front-Centre, SL = Surround-Left, SR = Surround-Right, RL = Surround-Left, RR = Surround-Right, RC = Surround-Centre, SUB = Subwoofer Note: The shorter delay on the SUB channel will not significantly affect audio performance. (It is equivalent to moving the subwoofer forwards by about 15cm.) DIGITAL AUDIO INTERFACE The digital audio interface is used for inputting audio data into the WM8608. It uses five pins: • DINFRONT: Front L+R channel data input • DINSRND: Surround L+R channel data input • DINC_LFE: Front Centre (L) and LFE (R) channel data input • DINREAR: Rear L+R channel data input • LRCLK: Data alignment clock • BCLK: Bit clock, for synchronisation The clock signals BCLK and LRCLK can be outputs when the WM8608 operates as a master, or inputs when it is a slave (see Master and Salve Mode Operation, below). MASTER AND SLAVE MODE OPERATION The WM8608 can be configured as either a master or slave mode device. As a master device the WM8608 generates BCLK and LRCLK and thus controls sequencing of the data transfer on the data channels. In slave mode, the WM8608 receives data and clock signals over the digital audio interface. The mode can be selected by writing to the MS bit (see Table 23). Master and slave modes are illustrated below. BCLK LRCLK DINFRONT WM8608 PWM Contoller DSP DECODER DINSRND DINREAR DINC_LFE BCLK LRCLK DINFRONT WM8608 PWM Contoller DSP DECODER DINSRND DINREAR DINC_LFE Master Mode Slave Mode Figure 8 Operation Mode AUDIO DATA FORMATS In Left Justified mode, the MSB is available on the first rising edge of BCLK following a LRCLK Audio data is applied to the internal filters via the Digital Audio Interface. 5 popular interface formats are supported: • Left Justified mode • Right Justified mode • I 2S mode • DSP mode A • DSP mode B All 5 formats send the MSB first and support word lengths of 16, 20, 24 and 32 bits. Except that 32 bit data is not supported in right justified mode. DINFRONT, DINSRND, DINC_LFE, DINREAR and LRCLK are sampled on the rising, or falling edge of BCLK. In left justified, right justified and I 2S modes the digital audio interface receives data on the DINFRONT, DINSRND, DINC_LFE and DINREAR inputs. Audio Data for each stereo channel is time |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |