TMS416409A, TMS417409A, TMS426409A, TMS427409A

4194304 BY 4-BIT EXTENDED DATA OUT

DYNAMIC RANDOM-ACCESS MEMORIES

SMKS893B – AUGUST 1996 – REVISED APRIL 1997

8

POST OFFICE BOX 1443

– 1 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

– 0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range on any pin (TMS41x409A) (see Note 1)

– 1 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range on any pin (TMS42x409A) (see Note 1)

– 0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Short-circuit output current

50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power dissipation

1 W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–55

°C to 125°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: All voltage values are with respect to VSS.

recommended operating conditions

TMS41x409A

TMS42x409A

MIN

NOM

MAX

MIN

NOM

MAX

UNIT

VCC

Supply voltage

4.5

5

5.5

3

3.3

3.6

V

VSS

Supply voltage

0

0

V

VIH

High-level input voltage

2.4

6.5

2

VCC + 0.3

V

VIL

Low-level input voltage (see Note 2)

–1

0.8

– 0.3

0.8

V

TA

Operating free-air temperature

0

70

0

70

°C

NOTE 2: The algebraic convention, where the more negative (less positive) limit is designated as minimum, is used for logic-voltage levels only.