6. Operating instruction.

1. Please take a LED with a cooler (termocooler). Carefully combine its many-

colored wires with pins of connector “LED” (1) tightly till fixation (fig.4).

the appropriate red wire of the LED (fig.4). In the case of wrong junction the LED

can be damaged.

Fig.4. Observance of polarity during the connection between the LED

and the LED connector (1).

2. If necessary with the help of cable for synchronization connect the signal

detector with the driver DLT-37 (jack “SYNCRO” (10)).

Fig.5. The polarity of jackplug of cable for synchronization.

3. Insert the jackplug of cable of AC/DC adapter into connector "+12V DC" (14).

Fig.6. The polarity of jackplug of power cable.

4. Using the button “Operation mode” (13) select the operating mode of the driver:

QCW or pulse. The appropriate green LED indicator “Pulse” (7) or “QCW” (6)

will be turned on.