DM6210 datasheet(67/91 Pages) ETC

67 / 91 page

9-3

Included with the DM6210 is a set of example programs that demonstrate the use of many of the modules

features. These examples are in written in C and BASIC. Also included is an easy-to-use menu-driven diagnostics

program, 6210DIAG, which is especially helpful when you are first checking out your module after installa-

tion and when calibrating the module.

Before using the software included with your module, make a backup copy of the disk. You may make as

many backups as you need.

C Programs

These programs are source code files so that you can easily develop your own custom software for your

DM6210. All of the programs use the files DRVR6210.C and PCUTILS.C. These files contain all of the

routines for setting up the board and acquiring data.

DRVR6210.C contains all the functions needed to control the A/D converter, the Digital I/O and the

Timer/Counters.

PCUTILS.C contain functions to help program the CPU for interrupts.

Quick Basic Programs

These programs are source code files so that you can easily develop your own custom software for your

DM6210. All of the programs rely on the DRVR6210.LIB and the DRVR6210.QLB library files. These library

files contain all of functions needed to interface to the DM6210. Make sure the proper library is loaded when

starting Quick Basic by typing QB/L DRVR6210. These libraries were created using Borland C 3.1 and were

generated from the file DRVR6210.C. Should you need to recompile the libraries, contact the factory for

details on this procedure.

DM6210 Datasheet(PDF) 67 Page - List of Unclassifed Manufacturers