1

®

FN8186.0

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 1-888-352-6832

XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved

All other trademarks mentioned are the property of their respective owners.

X93254

Dual Digitally Controlled Potentiometers

(XDCPs™)

FEATURES

• Dual solid-state potentiometers

• Independent Up/Down interfaces

• 32 wiper tap points per potentiometer

—Wiper position stored in nonvolatile memory

and recalled on power-up

• 31 resistive elements per potentiometer

—Temperature compensated

—Maximum resistance tolerance of ± 30%

• Low power CMOS

—Active current, 250µA max

—Standby current, 1µA max

• High reliability

—Endurance 200,000 data changes per bit

—Register data retention, 100 years

• 14-lead TSSOP package

DESCRIPTION

The Intersil X93254 is a dual digitally controlled poten-

tiometer (XDCP). The device consists of two resistor

arrays, wiper switches, a control section, and nonvola-

tile memory. The wiper positions are controlled by indi-

vidual Up/Down interfaces.

A potentiometer is implemented by a resistor array

composed of 31 resistive elements and a wiper switch-

ing network. The position of each wiper element is

controlled by a set of independent CS, U/D, and INC

inputs. The position of the wiper can be stored in non-

volatile memory and then be recalled upon a subse-

quent power-up operation.

Each potentiometer is connected as a two-terminal

variable resistor and can be used in a wide variety of

applications including:

– Bias and Gain control

– LCD Contrast Adjustment

BLOCK DIAGRAM

Control

and

Memory

Up/Down

Increment

Device Select

30K

Control

and

Memory

Up/Down

Increment

Device Select

30K

Data Sheet

March 1, 2005