| Electronic Components Datasheet Search |
|
VSC7440 Datasheet(PDF) 418 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC7440 Datasheet(HTML) 418 Page - Microsemi Corporation |
|
418 / 444 page ![]() Electrical Specifications VMDS-10492 VSC7440 Datasheet Revision 4.2 401 6.5 Stress Ratings Warning Stresses listed in the following table may be applied to devices one at a time without causing permanent damage. Functionality at or exceeding the values listed is not implied. Exposure to these values for extended periods may affect device reliability. Warning This device can be damaged by electrostatic discharge (ESD) voltage. Microsemi recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures may adversely affect reliability of the device. Power supply voltage for DDR3 interface VDD_IODDR 1.425 1.5 1.575 V Power supply voltage for DDR3L interface VDD_IODDR 1.28 1.35 1.45 V Power supply voltage for GPIO and miscellaneous I/O VDD_IO 2.375 2.5 2.625 V Operating temperature3 T –40 125 °C 1. VDD_HS should be powered with the 1.2 V supply to meet 1000BASE-KX, 1000BASE-KR, 10G SFI, and DAC specifications. 2. VDD_VS should be powered with the 1.2 V supply to meet 1000BASE-KX, XAUI, 10GBASE-CX4, 10GBASE-KX4, and PCIe specifications 3. Minimum specification is ambient temperature, and the maximum is junction temperature. Table 323 • Stress Ratings Parameter Symbol Minimum Maximum Unit Power supply voltage for core supply VDD –0.3 1.10 V Power supply voltage for analog circuits VDD_A –0.3 1.10 V Power supply voltage for 10G interface VDD_HS –0.3 1.32 V Power supply voltage for 1G and 6G interfaces VDD_VS –0.3 1.32 V Power supply voltage for copper PHY analog circuits VDD_AL –0.3 1.10 V Power supply voltage for copper PHY interface VDD_AH –0.3 2.75 V Power supply voltage for DDR I/O buffers VDD_IODDR –0.3 1.98 V Power supply voltage for GPIO and miscellaneous I/O VDD_IO –0.3 2.75 V Storage temperature TS –55 125 °C Electrostatic discharge voltage, charged device model VESD_CDM –500 500 V Electrostatic discharge voltage, human body model, CLKOUTPLL2_N and CLKOUTPLL2_P pins VESD_HBM –1750 1750 V Electrostatic discharge voltage, human body model, all pins except the CLKOUTPLL2_N and CLKOUTPLL2_P pins VESD_HBM See note1 1. This device has completed all required testing as specified in the JEDEC standard JESD22-A114, Electrostatic Discharge (ESD) Sensitivity Testing Human Body Model (HBM) , and complies with a Class 2 rating. The definition of Class 2 is any part that passes an ESD pulse of 2000 V, but fails an ESD pulse of 4000 V. V Table 322 • Recommended Operating Conditions (continued) Parameter Symbol Minimum Typical Maximum Unit |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |