7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1) (2) (3)

MIN

MAX

UNIT

Supply voltage

–0.5

6

V

Logic control input pin voltage (EN, A0, A1, A2)

–0.5

6

Source or drain voltage (Sx, D)

–0.5

Logic control input pin current (EN, A0, A1, A2)

–30

30

mA

Continuous current through switch (Sx, D pins) –40°C to +85°C

–50

50

Continuous current through switch (Sx, D pins) –40°C to +125°C

–25

25

Continuous current through GND

–100

100

Total power dissipation(4)

500

mW

Storage temperature

–65

150

°C

Junction temperature

150

(1)

Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.

(3)

All voltages are with respect to ground, unless otherwise specified.

(4)

7.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1)

±2000

V

Charged device model (CDM), per JEDEC specification JESD22-C101

or ANSI/ESDA/JEDEC JS-002, all pins(2)

±750

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN NOM

MAX

UNIT

Supply voltage

1.62

5.5

V

Signal path input/output voltage (source or drain pin) (Sx, D)

0

V

Logic control input pin voltage (EN, A0, A1, A2)

0

5.5

V

Continuous current through switch (Sx, D pins) –40°C to +85°C

–50

50

mA

Continuous current through switch (Sx, D pins) –40°C to +125°C

–25

25

mA

Current per input into source or drain pins when singal voltage exceeds

recommended operating voltage (1)

–50

50

mA

Injected current into single off switch input

–50

50

mA

Total injected current into all off switch inputs combined

–100

100

mA

Ambient temperature

–40

125

°C

(1)

If source or drain voltage exceeds VDD, or goes below GND, the pin will be shunted to GND through an internal FET, the current must

www.ti.com

TMUX1308, TMUX1309

SCDS426C – MARCH 2020 – REVISED AUGUST 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

7

Product Folder Links: TMUX1308 TMUX1309