8.2 Functional Block Diagram

The TMUX1308 is an 8:1, single-ended (1-channel), mux. The TMUX1309 is a 4:1, differential (2-channel) mux.

Each channel is turned on or turned off based on the state of the address lines and enable pin.

TMUX130 8

A0

A1

A2

EN

S1

D

S2

S3

S4

S5

S6

S7

S0

1-OF-8

DECODER

TMUX130 9

S0A

DB

S1A

S2A

S3A

S0B

S1B

S2B

S3B

DA

A0

A1

EN

1-OF-4

DECODER

Figure 8-12. TMUX1308 and TMUX1309 Functional Block Diagram

8.3 Feature Description

8.3.1 Bidirectional Operation

The TMUX1308 and TMUX1309 devices conduct equally well from source (Sx) to drain (Dx) or from drain (Dx)

to source (Sx). Each signal path has very similar characteristics in both directions so they can be used as both

multiplexers and demultiplexer to supports both analog and digital signals.

8.3.2 Rail-to-Rail Operation

8.3.3 1.8 V Logic Compatible Inputs

The TMUX1308 and TMUX1309 support 1.8-V logic compatible control for all logic control inputs. The logic input

thresholds scale with supply but still provide 1.8-V logic control when operating at 5.5-V supply voltage. 1.8-V

logic level inputs allows the multiplexers to interface with processors that have lower logic I/O rails and

eliminates the need for an external voltage translator, which saves both space and BOM cost. The current

consumption of the TMUX1308 and TMUX1309 devices increase when using 1.8-V logic with higher supply

voltage. For more information on 1.8-V logic implementations refer to Simplifying Design with 1.8 V logic Muxes

and Switches.

8.3.4 Fail-Safe Logic

The TMUX1308 and TMUX1309 device have Fail-Safe Logic on the control input pins (EN, A0, A1, and A2)

allowing for operation up to 5.5-V, regardless of the state of the supply pin. This feature allows voltages on the

control pins to be applied before the supply pin, protecting the device from potential damage. Fail-Safe Logic

minimizes system complexity by removing the need for power supply sequencing on the logic control pins. For

example, the Fail-Safe Logic feature allows the select pins of the TMUX1308 and TMUX1309 to be ramped to

allowing the select pins to interface with a logic level of another device up to 5.5-V, eliminating the potential need

for an external voltage translator.

8.3.5 Injection Current Control

whichever supply of the device potentially compromising the accuracy and reliability of the system. Injected

currents can come from various sources depending on the application.

TMUX1308, TMUX1309

SCDS426C – MARCH 2020 – REVISED AUGUST 2020

www.ti.com

22

Submit Document Feedback

Copyright © 2020 Texas Instruments Incorporated

Product Folder Links: TMUX1308 TMUX1309