Page 14

ams Datasheet

Document Feedback

[v1-12] 2020-May-14

AS5600L − Detailed Description

I²C Timing

Figure 17:

I²C Timing

Note(s):

1. After this time, the first clock is generated.

to bridge the undefined region of the falling edge of SCL.

if the device does not stretch the low phase of SCL. If such a device does stretch the low phase of SCL, it must drive the next data

4. In Fast-mode Plus, fall time is specified the same for both output stage and bus timing. If series resistors are used, this has to be

considered for bus timing.

Symbol

Parameter

Min

Max

Unit

SCL clock frequency

1.0

MHz

Bus free time (time between the STOP and START

conditions)

0.5

μs

Hold time; (Repeated) START condition (1)

0.26

μs

Low phase of SCL clock

0.5

μs

High phase of SCL clock

0.26

μs

Setup time for a Repeated START condition

0.26

μs

Data hold time (2)

0.45

μs

Data setup time (3)

50

ns

Rise time of SDA and SCL signals

120

ns

Fall time of SDA and SCL signals

10

120 (4)

ns

Setup time for STOP condition

0.26

μs