| Electronic Components Datasheet Search |
|
SL2S6002 Datasheet(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SL2S6002 Datasheet(HTML) 8 Page - NXP Semiconductors |
|
8 / 14 page ![]() SL2S6002_SDS All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved. Product short data sheet COMPANY PUBLIC Rev. 3.0 — 16 June 2016 374730 8 of 14 NXP Semiconductors SL2S6002 ICODE DNA 6.3 Communication principle For detailed description of the protocol and timing, refer to ISO/IEC 15693-2 (modulation, bit-coding, framing, Ref. 3) and ISO/IEC 15693-3 (anticollision, timing, protocol, Ref. 4). 6.4 State diagram The state diagram illustrates the different states of the ICODE DNA. Remark: It is possible to set the ICODE DNA IC into the Quiet and Persistent Quiet mode at the same time. In this case the behavior is the same as for the Quiet state only until the IC enters the Power-off state. The IC enters to the Persistent Quiet mode at the next power-on if the persistent time has not been exceeded. 6.5 RF interface The definition of the RF interface is according to the standard ISO/IEC 15693-2 and ISO/IEC 15693-3. Fig 2. State diagram ICODE DNA aaa-023509 Any other command where the Addressed_flag is set AND where inventory_flag is not set Any other command where Selected_Flag is set * Any other command where the Addressed_flag is set AND where inventory_flag is not set or where inventory_flag AND AFI_flag is set or Inventory Read (extended mode) with both Goto Quiet flags set or EAS Alarm Quiet (* Perststent Quiet) Ready Power-off Selected Select (UID) Stay Quiet (UID) Select (UID) In Field, if persistent quiet off Any other command where Selected_Flag is not set * In Field, if persistent quiet on Reset to Ready Reset to Ready where Selected_Flag is set or Select (different UID) Stay Quiet (UID) or Inventory Read (extended mode) with Quiet_Flag is set Out of Field Out of Field Out of Field * Stay Quiet Persistent (UID) Selected Secure Stay Quiet VCD Authenticated (UID) VCD Authenticated (UID) Reset to Ready where Selected_Flag is set or Select (different UID) or challange or new Authenticate VCD Authenticated with Selected_Flag set Select (UID) ReadBuffer commands or any other command where Selected_Flag is set Out of Field |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |