SST26WF040BT-104ISLASHCS datasheet(11/96 Pages) MICROCHIP

11 / 96 page

 2014-2017 Microchip Technology Inc.

DS20005283C-page 11

SST26WF040B/040BA SST26WF080B/080BA

4.5.3

WRITE SUSPEND PROGRAM

STATUS (WSP)

The Write Suspend-Program status (WSP) bit indicates

when a Program operation has been suspended. The

WSP is ‘1’ after the host issues a suspend command

during the Program operation. Once the suspended

Program resumes, the WSP bit is reset to ‘0’.

4.5.4

WRITE PROTECTION LOCK-DOWN

STATUS (WPLD)

The Write Protection Lock-Down status (WPLD) bit

indicates when the Block-Protection register is locked-

down to prevent changes to the protection settings.

The WPLD is ‘1’ after the host issues a Lock-Down

Block-Protection command. After a power cycle, the

WPLD bit is reset to ‘0’.

4.5.5

SECURITY ID STATUS (SEC)

The Security ID Status (SEC) bit indicates when the

Security ID space is locked to prevent a Write com-

mand. The SEC is ‘1’ after the host issues a Lockout

SID command. Once the host issues a Lockout SID

command, the SEC bit can never be reset to ‘0.’

4.5.6

BUSY

The Busy bit determines whether there is an internal

Erase or Program operation in progress. If the BUSY

bit is ‘1’, the device is busy with an internal Erase or

Program operation. If the bit is ‘0’, no Erase or Program

operation is in progress.

4.5.7

CONFIGURATION REGISTER

The Configuration register is a Read/Write register that

stores a variety of configuration information. See Table

4-3 for the function of each bit in the register.

TABLE 4-3:

CONFIGURATION REGISTER

Bit

Name

Function

Default at Power-up

Read/Write (R/W)

0RES

Reserved

1IOC

I/O Configuration for SPI Mode

1 = WP# and HOLD# pins disabled

0 = WP# and HOLD# pins enabled

1. SST26WF040B and SST26WF080B default at Power-up is ‘0’

SST26WF040BA and SST26WF080BA default at Power-up is ‘1’

R/W

2RES

Reserved

BPNV

Block-Protection Volatility State

1 = No memory block has been permanently locked

0 = Any block has been permanently locked

4RES

Reserved

5RES

Reserved

6RES

Reserved

WPEN

Write-Protection Pin (WP#) Enable

1 = WP# enabled

0 = WP# disabled

2. Factory default setting. This is a non-volatile bit; default at power-up will be the setting prior to power-down.

R/W

SST26WF040BT-104I/CS Datasheet(PDF) 11 Page - Microchip Technology

SST26WF040BT-104I/CS Datasheet(HTML) 11 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

Datasheet Download

Link URL