R

EMDB6812

Copyright © 2004, EM Microelectronic-Marin SA

18

www.emmicroelectronic.com

Subroutine GetSVLD(void) ;

4.5 HOST APPLICATION

For testing the Microcontroller software, a MS-Windows based utility has been developed, which

allows to send/receive the Host-Commands via serial COM-Ports. USB to RS232 converters are

also supported.

4.5.1

Setup

First you have to select the Com-Port you want to use. The Hardware has to be connected

to the corresponding Com-Port by a 9pol serial cable. Wiring is 1:1

Send SVLD value to UART

Start SVLD Measurement

GetSVLD_End

GetSVLD