FN8116 Rev 0.00

Page 21 of 24

March 28, 2005

X40410, X40411, X40414, X40415

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2005. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

VTRIP1, VTRIP2, Programming Specifications: VCC = 2.0–5.5V; Temperature = 25°C

Parameter

Description

Min.

Max.

Unit

tVPS

WDO Program Voltage Setup time

10

µs

tVPH

WDO Program Voltage Hold time

10

µs

tTSU

VTRIPX Level Setup time

10

µs

tTHD

VTRIPX Level Hold (stable) time

10

µs

tWC

VTRIPX Program Cycle

10

ms

tVPO

Program Voltage Off time before next cycle

1

ms

VP

Programming Voltage

15

18

V

VTRAN1

VTRIP1 Set Voltage Range

2.0

4.75

V

VTRAN2

VTRIP2 Set Voltage Range – X40410/11

1.7

4.75

V

VTRAN2A

VTRIP2 Set to Voltage Range – X40414/15

0.9

3.5

V

Vtv

VTRIPX Set Voltage variation after programming (-40 to +85°C).

-25

+25

mV

tVPS

WDO Program Voltage Setup time

10

µs